DYEING MACHINE AUTOMATION ACCESORIES

Pioneers in the industry, we offer dp transmitter for main vessel level for hthp dyeing machine, magnetic level transmitter, dp transmitter for measuring in-out,out-in pressure for yarn dyeing machines, bubbler level sensor, level sensor for dosing tank and seam detectors from India.

DP Transmitter For Main Vessel Level For HTHP Dyeing Machine

REQUEST CALLBACK
  • DP Transmitter For Main Vessel Level For HTHP Dyeing Machine
  • DP Transmitter For Main Vessel Level For HTHP Dyeing Machine
  • DP Transmitter For Main Vessel Level For HTHP Dyeing Machine

Ask for Price

Product Price: Ask Latest Price

D.P TRANSMITTER FOR MEASURING MAIN VESSEL LEVEL FOR DYEING MACHINE MAIN VESSEL FOR MEASURING ACCURATE LEVEL EVEN WHEN VESSEL IN PRESSURIZATION MODE FOR REPLACING MAGNETIC FLOAT TYPE LEVEL CONTROLLER 

STD 700 transmitters offer the following compelling features:

  • Accuracy of up to 0.05% of span
  • Onboard pressure and temperature compensation
  • Alphanumeric display capability
  • External zero, span and configuration capability
  • 100ms response time
  • Polarity-insensitive electrical connections.

Yes! I am Interested

Magnetic Level Transmitter

REQUEST CALLBACK
  • Magnetic Level Transmitter
  • Magnetic Level Transmitter
  • Magnetic Level Transmitter
  • Magnetic Level Transmitter

Ask for Price

Product Price: Ask Latest Price

The Magnetic Level Transmitter for Main Vessel
HOW IT WORKS:A level measure system with reed probe is based on the positive buoyancy principle,that determines the movement of a float situated in a guide pipe linked with the controlled tank Inside the float there is a permanent magnet. The transducer is made with asequence of series resistances, supplied with constant voltage, inside a 316SS pipe: at everynode of the series is connected the contact of a reed bulb. The floating magnet lead to contactclosing of the nearest reed, allowing the readout of a fraction of supply voltage, proportional tothe measured level. Accuracy of the system rely on the distance between reed bulbs;an excessive small distance between bulbs allow excitation of more than one reed, and thus isa limit to the system precision.TECHNICAL SPECIFICATIONS:Supply: 24vdcProtection degree: IP65Working temperature: MAX 95°CStandard probe length: 700 - 900 - 1100 - 1300 - 1500 mm
o/p 4-20 mA



Yes! I am Interested

DP Transmitter for measuring in-out,out-in pressure for yarn dyeing machines

REQUEST CALLBACK
  • DP Transmitter for measuring in-out,out-in pressure for yarn dyeing machines
  • DP Transmitter for measuring in-out,out-in pressure for yarn dyeing machines
  • DP Transmitter for measuring in-out,out-in pressure for yarn dyeing machines

Ask for Price

Product Price: Ask Latest Price

This D.P transmitter can be used for closed loop controlling the in out & out in
Differential pressure of main pump


The measuring means is a piezo resistive sensor, which actually contains three sensors in one. It uses a differential pressure sensor, a temperature sensor and a static pressure sensor in delivering the most comprehensive compensated output signal available today.Microprocessor-based electronics provide higher span turn down ratio, improved temperature and pressure
Total Accuracy = ±0.0375%
Stability = ±0.01% per year
Reliability = 470 years MTBF
Range-ability = 400 to 1


Additional Information:

Item Code: DPINOUT

Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

Bubbler Level Sensor

REQUEST CALLBACK
  • Bubbler Level Sensor
  • Bubbler Level Sensor
  • Bubbler Level Sensor
  • Bubbler Level Sensor

Ask for Price

Product Price: Ask Latest Price

The Bubbler Sensor for Additional Tank

with capacitive measuring cell and ceramic measuring diaphragm

Specification
output 4-20 mA
measuring range 100,200 & 400 millibar
process tempraure 0 to100 c
ambient temprature -20 to 85 c
power 6 watt
supply 11 to 30vdc
max working pressure 2.7 bar (1oo), 3.3bar (200) & 5.3bar (400)
over pressure limit 4 bar (100) 5 bar (200) & 8 bar (400)



Yes! I am Interested

Level Sensor For Dosing Tank

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Hydrostatic level sensors
This sensors measure the water pressure in the tank which is directly propotional to the water level sensor in the tank

This sensor needs an air isolated mounting method the position of the sensor should always be above the highest level

P300 = 100 mBAR P40= 100mBAR
P320 = 200 mBAR P42= 200mBAR
P330 = 300 mBAR P43= 300mBAR
P340 = 400 mBAR P44= 400mBAR
P350 = 500 mBAR P45= 500mBAR

MEDIA ISOLATION AIR AIR
OUT PUT 4-20 mA 4-20 mA
EXCITATION VOLTAGE 24VDC (18-30VDC) 24VDC (18-30VDC)
LOAD DRIVING (MAX) 500mA (24VDC) 500mA (24VDC)
OPERATING TEMP 60 C 60 C
OVERPRESSURE 750 mBAR 750 mBAR
LINEARITY < 1% < 1%
MECHANICAL CONNECTION 1/4 BSP RAIL MOUNTED
ENVIRONMENTAL RATING IP 65 IP 65

Additional Information:

Item Code: P3XXANDP4XX

Yes! I am Interested

Seam Detectors

REQUEST CALLBACK
  • Seam Detectors
  • Seam Detectors
  • Seam Detectors

Ask for Price

Product Price: Ask Latest Price

Seam detector is sensor used for detecting seam for unloading and monitoring cycle time in fabric dyeing machines
S40
Technical Details

  • SENSING RANGE NORMAL 0 TO 25 CM
  • HIGH 0 TO 35 CM
  • EXCITATION VOLTAGE 24VDC
  • LOAD DRIVING 100mA 24VDC
  • MIN OP PULSE LENGTH 1 SECONDS
  • MIN SENSING PERIOD 3 SECONDS
  • SIGNALS SUPPLY RED LED
  • SIGNALS OUTPUT GREEN LED
  • SIGNALS GAIN NORMAL RED LED
  • POWER CONSUMPTION 1 W
  • ENVIRONMENTAL RATING IP 65

S400 Technical specifications same as s40 but it has dual sensing sensor for keeping track of magnet for guaranteed detection

Additional Information:

Item Code: S40

Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

Temperature Sensor for HTHP Dyeing Machines

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Temp sensors RTD type  suitable for all type HTHP dyeing machine (fabric,yarn beam dyeing)
Temp pt 100 with 1/2 BSP thread (other thread on request)
Available in simplex(single channel) duplex (dual channel) & triplex (triple channel)
Available in 2 wire as well as 3 wire
Temp range 0 to 150 degree centigrade.
Pressure 0 to 6 bar

Additional Information:

Item Code: TEMPSENSOR

Yes! I am Interested

Push Button Station

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Precisely designed industrial Push Button Station are now offered at industry leading price. Our sensors find their application in automobiles, research and development departments, robotics, process industries. We carve these sensors by using premium quality raw materials procured from reliable vendors. These sensors are widely appreciated for their problem free service life and accurate performance level.

Specification:

  • Ambient temperature: -25~70Centigrade
  • Rated insulation voltage: UI=500V
  • Altitude above sea level: <2, 000m

Yes! I am Interested

Fluid Level Controller

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Our in-depth industrial experience enables us to manufacture, trader and service provider of an extensive range of Fluid Level Controller. Available in varied specifications, these controllers are widely acclaimed for their reliable performance, excellent quality, longer serving life and cost effectiveness.

Specifications:
Tolerance: ±8±2 mm
Transmitting: above2000mm
Medium density: above 0.5g/cm3
Working pressure: PN2.5~PN160
Working temperature: -40~80°C; -40~120°C
High temperature type: ≤150°C


Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

Forward Reverse Timer With Pause Time

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Forward reverse timer with pause time beteween forward & reverse and enable signal to start the timer

Forward setable time 99 min 99 sec
pause time setable time 99 min 99 sec
Reverse setable time 99 min 99 sec

Sutable for using for the following

In-out & out in time for yarn dyeing main pump or valve
In-out & out in time for beam dyeing main pump or valve

Forward /reverse for drum washer

Specifications

Microprocessor based
4 digit first 2 for min & secon 2 for sec
Enable signal to start the timer s1 & s2
LED indication for forward,reverse & hold
4 key for pogramming the time
Set,increment,decrement, & enter

Power supply 230 vac

2 relay o/p 1 for forward (no) & 1 for reverse 9no)
Optional nc connection also on request

4 relay 2 for forward o/p (n0) & 2 for reverse (no)
Optional nc connection also on request

Additional Information:

Item Code: F-R-TIMER

Yes! I am Interested

X